Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP
TREATMENT MODE PARAMETERS (Continued)
AIR SPEED
Press the "PRESS TO CHANGE MODE"
button until the indicator light is beside
"AIR SPEED".
NOTE:
The default speed of "50" will be displayed.
Press the "INCREASE" or "DECREASE"
buttons until desired Air Speed is
displayed.
NOTE:
The "AIR SPEED" is adjusted in increments
of 5 from 0 to 100.
13
Fluidotherapy ® - Dry Heat Therapy
PULSE TIME
Press the "PRESS TO CHANGE MODE"
button until the indicator light is beside
"PULSE TIME".
NOTE:
The "PULSE TIME" allows the unit to
operate by pulsing the medium during
treatment. If selected and set, the medium
will pulse on and off in equal increments.
The Factory Default is "OFF".
EXAMPLE: "PULSE TIME" is set at "5".
The unit will pulse the medium during
treatment, five seconds on and five
seconds off.
Press the "INCREASE" or "DECREASE"
buttons until desired Pulse Time is
displayed.
NOTE:
"PULSE TIME" is adjusted in one second
increments from "OFF" to 6 seconds.
Publicidad
