Legend Brands LGR 7000 XLi Manual De Instrucciones página 15

Idiomas disponibles

Owner's Manual

1.7

Transporting and Storage

IMPORTANT: Before moving, transporting or storing, purge unit and stow

hose as described in the "At the End of the Job" section.

NOTICE: Always unplug power cord before moving, transporting, or storing

the unit.

NOTICE: Handle the unit carefully. Do not drop, throw, or place the unit where it could

fall. Rough treatment can damage this equipment and may create a hazardous

condition or void warranty.

Do not use or store near ignition sources, combustible gases, electric heaters or

open flames.

Do not expose the control panel to moisture, snow or rain.

Store and transport securely to avoid any damaging impact to internal parts.

Secure during transport to prevent sliding and possible injury to vehicle

occupants

Do not transport or store the unit on its front, sides or back. This will help to

prevent any remaining moisture from escaping from the unit or flowing into

areas outside the pump.

Special tip for transporting on stairs:

Before transporting unit on stairs, follow these additional steps to ensure that all

water is removed from the unit:

1. Turn the unit off after a defrost cycle has been completed. Gently rock the

upright machine on its wheels to ensure any water remaining on interior

surfaces falls into the sump area.

2. Press the PURGE key. When the purge cycle is complete, turn the unit off.

3. Remove the external drain hose, drain it carefully, and return it to the pocket

provided on the side of the unit.

4. IMPORTANT: Coil power cord and place it in the cord storage pocket to keep

the cord from catching on stairs or other items and thus damaging the cord.

LGR 7000 XLi Owner's Manual