Ingersoll Rand QX Serie Manual De Usuario página 11

Press 'ENTER' to enter the 'EDIT' mode. Enter the appropriate password to unlock the tool. Press 'ENTER' to exit the 'EDIT'
mode.
2.3.1. Updating parameters of the QX Series tool
After display is unlocked with a valid password, Pressing "RIGHT" key will advance to following settings that can be
modified as required.
The settings can be modified by entering "EDIT MODE" and using "UP" or "DOWN" key or "RIGHT" or "LEFT" key as
required.
2.3.2. Radio Enable/Disable
This screen allows the user to enable or disable the radio module. The selection on the left disables the radio module
and the selection on the right enables the radio module.
48619852_ed1
RADIO DISABLED
RADIO ENABLED
EN
EN-9