Ingersoll Rand QX Serie Manual De Usuario página 14

EN
2.3.7. Torque Threshold
The Torque at which reading of the angle will be started. The value can be edited by entering "EDIT" mode and using
"UP" and "DOWN" arrow.
2.3.8. Angle
Angle "LOW" Display
Angle "LOW" can be modified in this mode by
entering "EDIT" mode and using "UP or "DOWN" key.
EN-12
Angle "HIGH" Display
Angle "HIGH" can be modified in this mode by
entering "EDIT" mode and using "UP or "DOWN" key.
48619852_ed1