Digifast commander cmd 77 Manual Del Usuario página 27

How to set the TURBO function
Press and hold the Turbo button, then push one or more buttons of "A, B, X, Y, L1, R1, L2, R2" at the same time. The
pressed buttons will now have turbo capability.
When you want to cancel the turbo continuous action function, press and hold the Turbo button and push your previous
defined turbo button at the same time. The turbo action function will cancel automatically.
This Turbo function is supported when connected to Android, PC and PSX3 devices. It is the photo function when
connected with the Switch console.
How to set the MACRO function
The default of the extend buttons that the T1 is A button and T2 is B button. You can press and hold the T1 or T2 and
START buttons until the RGB LED begins flashing quickly to enter the setting mode.
ㅦ Press the extend button which you want to configure for the Macro function
ㅦ Then press the buttons from "A, B, X, Y, L1, R1, L2, R2, L3, R3" in the desired order.
ㅦ The set up will be completed after you press the extend button again
When you want to cancel the buttons setting, hold the T1 or T2 and START button until the RGB LED quickly flashes to
enter the setting mode. Push the extend buttons to disable the setting.
27