Selco RC 350 Instrucciones De Uso página 10

2.2 Front control panel
1 Power supply
Indicates that the equipment is connected to the mains
and is on.
2 General alarm
Indicates the possible intervention of protection devices
such as the temperature protection.
3 Power on
Indicates the presence of voltage on the equipment
outlet connections.
4 7-segment display
Allows the general welding machine parameters to be
displayed during start-up, settings, current and voltage
readings, while welding, and encoding of the alarms.
5 LCD display
Allows the general welding machine parameters to be
displayed during start-up, settings, current and voltage
readings, while welding, and encoding of the alarms.
Allows all the operations to be displayed instantaneously.
6 Main adjustment handle
Allows entry to set up, the selection and the setting of
the welding parameters.
7 Processes/functions
Allow the selection of the functions provided on the
system to which the remote control is connected.
Consult the instruction manual Genesis ...
8 Synergy
Lets you select a preset welding program (synergy) by
choosing a few simple settings:
- wire type
- gas type
- wire diameter
9 Programs
Allows the storage and management of 64 welding
programs which can be personalised by the operator.
10
3 TECHNICAL SPECIFICATIONS
Power supply voltage U1
Maximum input power (W)
Input current I1
Manufacturing Standards
Dimensions (lxdxh)
Weight
Power supply cable
RC 350
15Vdc
1.5W
100mA
EN 60974-1
EN 60974-10
200x150x90 mm
1.4 Kg.
6m