Flo 79502 Manual De Instrucciones página 19

EN
before connecting to the power supply and / or battery, lifting or moving the power
tool. Moving the power tool with the fi nger on the switch or powering the power tool, when
the switch is in the "on" position can lead to serious injuries.
Before turning on the power tool remove any keys and other tools that were used to
adjust it. The key left on the rotating parts of the power tool can lead to serious injuries.
Do not reach and do not lean too far. Keep the right attitude and balance all the time.
This will allow easier control over the power tool in case of unexpected work situations.
Dress accordingly. Do not wear loose clothing or jewelry. Keep your hair and clothing
away from moving parts of the power tool. Loose clothing, jewelry or long hair can be
caught by moving parts.
If the devices are fi tted for the connection of dust extraction or dust collection, make
sure that they are connected and used properly. The use of dust extraction reduces the
risk of dust hazards.
Do not let the experience acquired from frequent use of the tool resulted in careless-
ness and ignoring safety rules. Carefree action can cause serious injuries in a fraction of
a second.
Use and care of the power tool
Do not overload the power tool. Use the power tool appropriate for the selected ap-
plication. The right power tool will provide a better and safer job if used according to the
designed load.
Do not use the power tool, if the electric switch does not allow switching on and off .
Power tool, which cannot be controlled by means of a power switch is dangerous and must
be returned for repair.
Disconnect the plug from the power socket and / or remove the battery if it is de-
tachable from the power tool before adjusting, changing accessories or storing the
tool. Such preventive measures will allow you to avoid accidentally turning on the power
tool.
Keep the tool out of the reach of children, do not let people who do not know how to
operate the power tool or these instructions use a power tool. Power tools are danger-
ous in the hands of untrained users.
Maintain power tools and accessories. Check the tool for mismatches or jams of mov-
ing parts, damage to parts and any other conditions that may aff ect the operation of
the power tool. Damage must be repaired before using the power tool. Many accidents
are caused by incorrectly maintained tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp edges
are less prone to jamming and are easier to control when working.
Use power tools, accessories and inserted tools etc. in accordance with these in-
structions, taking into account the type and conditions of work. The use of tools for
work other than designed is likely to result in a dangerous situation.
Handles and gripping surfaces must be dry, clean and free from oil and grease. Slip-
pery handles and gripping surfaces do not allow for safe operation and control of the tool in
dangerous situations.
O R I G I N A L I N S T R U C T I O N S
19