G-U B-55600-10-4-6 Manual De Instrucciones Y De Montaje página 37

7.7 Adjusting the signalling for the keystrokes
The acoustic and visual signalling for the keystrokes can be adjusted
using 4 preset modes. The acoustic and visual signals for the keystrokes are
switched on by default. Enter the number for the desired mode as follows:
0 = acoustic and visual signals switched off
1 = acoustic signals switched on and visual signals switched off
2 = acoustic signals switched off and visual signals switched on
3 = acoustic and visual signals switched on
The admin menu is required to adjust the signalling for the keystrokes.
To access the admin menu, enter the admin code.
Press √ Enter the
to start admin code
entering the
admin code
√
√ 54 Enter the
number for
the desired
mode, e.g. 2
37