Descargar Imprimir esta página

G-U B-55600-10-4-6 Manual De Instrucciones Y De Montaje página 39

Publicidad

Idiomas disponibles

Idiomas disponibles

8.
Opening the door
Enter a pro-
Press √ and
grammed
the door
user code
opens
NOTE
NOTE
The user
code has not
been
recognised
If you enter the code incorrectly 3 times, you will
be locked out of the system for 1 minute. If you
enter the code incorrectly 3 times again, you will be
locked out for a further 15 minutes. Subsequently,
you will be locked out for 15 minutes each time you
enter the code incorrectly.
The lock can be reversed before it is due to end by
entering an authorised user code twice. No signal-
ling is activated in this case.
If you open your door for longer than 12 seconds,
the code keypad will switch to idle mode. Once the
door has been closed again and the voltage supply
is reactivated, the code keypad will briefly display
the following message: "Factory setting – no cou-
pling", until normal mode automatically resumes.
39

Publicidad

loading