Publicidad
RECOLECCIÓN DE POLVO Y AUTO LIMPIEZA
TECNOLOGÍA DE GIROSCOPIO INTELIGENTE
1. Desde la app "Tuya Smart" Seleccione la pantalla principal de su Aspiradora Robot.
2. La Aspiradora Robot realizará un mapeo inteligente, mediante la tecnología del
giroscópio, escaneando en tiempo real zonas y obstáculos en la periferia.
Nota: Aplica solo para modo de limpieza automático
CONFIGURACIÓN A ALEXA O GOOGLE HOME
CONFIGURACIÓN A ALEXA
1. Seleccione la opción de "Yo" en la pantalla principal de la app Tuya Smart.
2. Seleccione Alexa o Asistente de Google según lo desee y empareje sus dispositivos iniciando sesión con su cuenta de Amazon o
Google. De clic en "Vincular" y tendrá configurada su aspiradora.
CONFIGURACIÓN DE TAREAS INTELIGENTES EN TUYA SMART
1. En la pantalla principal de la app
2. Seleccione la opción "Tocar para ejecutar".
Tuya Smart seleccione a la opción
En la sección "Después" haga click sobre el signo de "+" para añadir una tarea.
"Escena" y después ir a la pestaña
"Ejecute" en la parte superior de la
pantalla y oprima el botón naranja
"Crear escena"
23
1. Ir a la opción de "Configuración" o "More"
2. Seleccione la opción de "Dust Collector" o "Recolector de polvo"
Elija la frecuencia con la que desee que su Aspiradora Robot sea limpiada por la
estación de limpieza.
ROBOT VACUUM CLEANER LED LIGHT AND WIFI INDICATOR
Wi-Fi
Light
Wi-Fi disconnected
Blue light flashing
Wi-Fi connected
Blue light ON
Robot status
Light indicator
Charging
Orange light breathes
Charging finished
Green light ON
Standby mode
Green light ON
Error
Red light ON/flashing
Low battery
Orange light ON
Cleaning
Green light ON
Sleeping mode
Light Off
Cleaning base
Light
Charging
Light OFF
Connected
White light ON
Collecting dust
White light flashing
No Dust Bag/Full Bag
Orange light ON
Clogged Clean Base Duct
Orange light ON
Error
Red light ON
REMOTE CONTROL
LCD display
mode and time
Return to charging
Auto cleaning
station
Control cleaning
Start / Stop
direction
Time setup
Schedule setup
Spot cleaning
Edge cleaning
Random cleaning
Max suction
ROBOT VACUUM CLEANER USE
MAIN UNIT
Place the Robot Vacuum Cleaner on the charging base. Making sure the
charging contacts on the base match the ones underneath the robot.
If the connection is successful you will hear a "beep", once the power
button lights up the Robot Vacuum Cleaner is ready for use.
Intelligent Cleaner Mode Introduction
Note: The following instructions are available with your remote control or directly from the
Robot Vacuum Cleaner.
CLEANING MODES AND PATTERNS
Note: The following instructions can be performed from the included remote control or through the Tuya Smart App.
AUTOMATIC MODE:
1. Press the power button to activate the Robot Vacuum Cleaner.
2. Press the power button again to start cleaning, the Robot Vacuum Cleaner will
start cleaning in automatic mode.
3. To send the Robot Vacuum Cleaner back to the charging base, press the button
A WAKE FROM INACTIVE MODE:
To stop the Robot Vacuum Cleaner during the cleaning cycle, press the on / off button
on the appliance, or from your remote control.
LED light
LED light
IMPORTANT: Install 2 AAA batteries
before using the remote control for
the first time. Make sure the positive
and negative ends are facing the
correct polarity direction as marked
in the battery compartment.
The Robot Vacuum Cleaner has
cleaning schedule settings that allow
you to customize when the Robot
cleans your home. These settings are
available through the remote control.
NOTE: Make sure the remote control is close to the robot
while setting the clock or time.
4
Publicidad
