KitchenAid 5KFP1318 Serie Manual Del Propietário página 8

PRODUCT ASSEMBLY (CONTINUED)
INSTALLING THE DICING KIT
1.
With the Work Bowl removed from the Base, place Dicing Kit Base, Blade (text side up) ,
and Cover in the Work Bowl.
2.
Align Dicing Kit Cover with wide mouth feed shoot.
3.
Place the Work Bowl Cover on the Work Bowl. Take out small and/or medium Feed Tube.
Insert food to dice.
4.
After dicing, remove the Work Bowl Cover, Dicing Kit Cover and Dicing Blade, then insert
the Dicing Kit Clean Out Tool into the Dicing Kit Base and push any extra food through the
grid.
PRODUCT USAGE
Before operating the Food Processor, be sure the Work Bowl, Blades/Disc, and Work Bowl
Cover are properly assembled with the Large Pusher in place or the unit will not operate
(see the "Product Assembly" section).
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputation or cuts.
1.
To turn on, press 1 or 2. The Food Processor will run continuously and the indicator light
will glow.
To turn off, press 1 or 2 again, or press O/Pulse.
2.
To use the Pulse function: Press O/Pulse for short bursts, or press and hold for longer
bursts. The Pulse function runs at speed 2 only. The Food Processor will turn off when the
O/Pulse button is released.
3.
When finished, press the O/Pulse button. The indicator light will go out and the Blade or
Disc will slow to a stop.
4.
Wait until the Blade or disc comes to a complete stop before removing the Work Bowl
Cover. Be sure to turn off the Food Processor before removing the Work Bowl Cover, or
before unplugging the Food Processor.
8
WARNING
Rotating Blade Hazard