Publicidad
Idiomas disponibles
Idiomas disponibles
1 Earbud LED indicator
2 Multifunction button: press the
multifunction button to start and pause
media, to answer or end an incoming call,
and to summon the Google or Siri voice
assistant
3. Microphone
4. Type C charging port: insert the Type C
cable in this port to charge the battery
5. Charging case battery LED indicator:
when the charging case is charging, the LED
indicator flashes red. When it reaches full
charge, the LED light remains on. When the
case charges the earbuds, the LED indicator
is solid blue. It turns off once it completely
charges the earbuds.
3. Basic operation
3.1. Charging the case and earbuds
1. To charge the case, plug the supplied USB
cable into a power source and the Type C
end into the case's charging port. The LED
indicator flashes red. When it reaches full
charge, the LED light remains on.
2. Charging the case battery to its full capacity
may take 1.5 hour.
3. Unplug the case from the power source and
place the earbuds on the sockets of the
charging case.
4. While the earbuds are being charged, the
LED indicator lights solid red. It takes 1.2
hour to fully charge the earbuds.
5. The fully charged earbuds have up to 18
hours of total run time depending on the
volume level and type of music file being
played. Battery runtime can last 6 hours per
charging cycle (3) for an estimated total of
18 hours combined.
Publicidad
