SIBRAPE BASIC PICCOLO Manual Del Usuario página 8

Dimensions
Controller
Problems/Causes /Solutions
Equipment does not
turn on.
Remote control does
not work.
Reflectors do not turn
on or turn on in the
wrong way.
Audio does not work.
Remote Control dis-
tance too short.
Remote control does
not program.
Controller turns on
itself when energized
8
Installation and User's Guide
Check if there is power (110 or 220) in the socket of the 12VDC Power Supply.
Check that the reflectors are connected correctly.
Check operation of the remote control.
Check the battery is in good condition.
Check that the transmission indication LED is on when you touch the control.
Reset the memory.
Check that the cable connection order is correct.
Check that there is no short circuit in the connections.
Check the sequence in the routine test: Green> Red> Green> Blue. If the sequence
is different, some color channel is inverted.
Check that the connector is plugged in correctly.
Make sure the sound source is positioned close to the microphone.
Replace the batteries with new ones.
Make sure that there are not many barriers between the controller and the remote
control.
Metal boxes make communication between the controller and the remote control
difficult.
Check that the battery is in good condition.
Run the Basic Piccolo controller routine test.
Reset the memory.
Check that the equipment was not connected when unplugging, as the controller
memorizes its last state and returns to it when energized.