Mac allister MPWP2200 Manual página 25

MPWP2200 by MacAllister
On/off switch
This product is equipped with dual speed system (DSS).
1. Set the on/off switch (16) in its "1" position to start the product and work
under ECO MODE (low speed) (Fig. 18, A). ECO MODE can save up to 25%
energy consumption.
2. Set the on/off switch (16) in its "2" position to start the product and work
under MAX POWER (high speed) (Fig. 18, B).
3. Set the on/off switch (16) in its "0" position to switch off the product (Fig. 18, C).
1
Trigger lock
The spray gun (9) is equipped with a trigger lock (9c) in order to prevent accidental
activation of the trigger (9d).
Activate the trigger lock
When the trigger lock (9c) is in locked position, the spray gun trigger (9d) is
disabled (Fig. 19, A).
Use the trigger lock when the product is not in use, when it is left unattended or
during assembly of additional accessories.
Deactivate the trigger lock
When the trigger lock (9c) is in unlocked position, the spray gun trigger (9d) is
enabled and ready for use (Fig. 19, B).
Press the trigger, a water jet sprays out of the nozzle. Release the trigger to stop
the water jet.
MNL_MPWP2200_MAC_GB_V5_200528.indd 25
A
9d
16
2
0
B
Fig. 18
9c
B
A
Fig. 19
Product functions
C
5/28/20 8:39 AM
EN EN
25