Mac allister MPWP2200 Manual página 31

MPWP2200 by MacAllister
Maintenance
Before and after each use, check the product and accessories (such as
application tools) for wear and damage. If required, exchange them for new ones
as described in this instruction manual. Observe the technical requirements.
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts
are available at an authorized dealer or through our customer service.
Description
Nozzle
Remove any dirt deposits from
the nozzle (18/19) hole using the
cleaning needle (24) (Fig. 23).
Water filter
1. Unscrew and remove the water inlet hose adaptor (22) from the water
inlet (6).
2. Disassemble the water inlet hose adaptor (22) (Fig. 24).
3. Rinse the water filter (22a) with clear water.
MNL_MPWP2200_MAC_GB_V5_200528.indd 31
Model no. or Specification
19
20
22a
22
Fig. 24
Care and maintenance
18
Fig. 23
EN EN
31
5/28/20 8:39 AM