Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING & MAINTENANCE
Appliance Maintenance:
1.
Turn off the appliance before disconnecting the power supply.
2.
Only clean the appliance with a soft, dry cloth.
Dust Filter Maintenance:
The Dust Filter is to be cleaned every two weeks to maintain
air cooling efficiency. Please follow the below instructions
for cleaning the Dust Filter:
1.
Turn off the appliance and pull the Dust Filter out slowly.
2.
Rinse in lukewarm water. After cleaning, dry in
a cool, shaded place, then reinstall.
End of Season Storage & Maintenance:
If the appliance will not be used for a long time, follow these steps:
1.
Be sure to drain the leftover water condensate. Remove the lower drain plug and use a
shallow pan to collect the water (make sure to replace the drain plug when finished).
2.
To dry excess moisture, run the unit in Fan-only mode for 30 minutes before storing.
3.
Turn off and unplug the air conditioner from the power supply.
4.
Remove the Dust Filter and clean with water. Dry the Dust Filter and then reinstall.
5.
Disconnecting the Window Installation Kit:
•
Remove the Hose from the unit by pulling up slowly.
•
Remove the hose from the Exhaust Hose Nozzle by rotating counter-clockwise then pulling
away.
•
It is recommended to store the hose and connetors in a bag together with the Remote Control
and place them together with the air conditioner unit.
•
If needed, you can clean the hose and connetors with a damp cloth before storing.
Make sure all parts of the hose and connetors are dry before storage.
6.
Cover the air conditioner with a cloth/plastic bag before storage to protect from scratches and
dust collecting on the surface of the unit.
7.
It is recommended to coil the power cord before storing to ensure the cord is protected from
dents and creases.
8.
Store the air conditioner in a cool, dry place away from direct sunlight.
EN
12
Dust Filter
Publicidad
