Control Panel - Mark BEAM 195 Instrucciones De Usuario

7. CONTROL PANEL

7.1 CONTROL PANEL INTRODUCTION
01. Version:
brand, model, version, number, lamp use time
02 ． Address:
* Set DMX channel address
03. Pan reverse:
* On (reversed) Off (normal)
04. Tilt reverse:
* On (reversed) Off (normal)
0 5. Pan/Tilt speed:
*F rom 01 -16, to set the speed for Pan/Tilt movement
06. Pan/Tilt mode:
* 8bit, 16bit, when set as 8bit, the channels Pan fine and Tilt fine will be
disabled, the fixture has 14 channels now.
07. Lamp mode:
* On (lamp on); Off (lamp off)
08. Reset:
01. Lighting reset :
02. Lamp time restore: [ password
*Can be set password afterwards to prevent unwanted modifying)
03. Motor
*Restore (can be set password afterwards to prevent unwanted modifying)
04. Exit.
BEAM 195
[001~512]
[On/Off]
[On/Off]
[ 01 -16 ]
[ 8bit /16bit
[On/Off]
Zero: [ password
User Manual/Manual de uso
]
]
]
Page 7
EN