Descargar Imprimir esta página

UNIPRODO UNI SAUNA C01 Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
EN
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
Product name
Sauna controller
Model
UNI_SAUNA_C01
Rated voltage [V~]
400 V 3N
Temperature regulation range
30-110
[°C]
Control panel dimensions [mm]
190x130x30
Connection box dimensions
300x260x100
[mm]
Weight [kg]
3.8
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this
user manual and regularly perform maintenance tasks.
The technical data and specifications in this user manual
are up to date. The manufacturer reserves the right to
make changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning!
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German.
Other language versions are translations from the
German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
6
The terms „device" or „product" are used in the warnings
and instructions to refer to < Sauna controller >. Do not
use in very humid environments or in the direct vicinity
of water tanks. Prevent the device from getting wet. Risk
of electric shock!
2.1. ELECTRICAL SAFETY
a)
Do not touch the device with wet or damp hands.
b)
Use the cable only for its designated use. Never
use it to carry the device or to pull the plug out of
a socket. Keep the cable away from heat sources,
oil, sharp edges or moving parts. Damaged or
tangled cables increase the risk of electric shock.
c)
If using the device in a damp environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
d)
Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician
or the manufacturer's service centre.
e)
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
2.2. SAFETY IN THE WORKPLACE
a)
If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
b)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
c)
Only the manufacturer's service point may
repair the device. Do not attempt any repairs
independently!
d)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on
2
live electrical devices) to put it out.
e)
Regularly inspect the condition of the safety
labels. If the labels are illegible, they must be
replaced.
f)
Please keep this manual available for future
reference. If this device is passed on to a third
party, the manual must be passed on with it.
g)
Keep packaging elements and small assembly
parts in a place not available to children.
h)
Keep the device away from children and animals.
i)
If this device is used together with another
equipment, the remaining instructions for use
shall also be followed.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under
the influence of alcohol, narcotics or medication
which can significantly impair the ability to
operate the device.
b)
The device is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or they have received instruction on how to
operate the device.
c)
To prevent the device from accidentally switching
on, make sure the switch is on the OFF position
before connecting to a power source.
d)
The device is not a toy. Children must be
supervised to ensure that they do not play with
the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does
not function properly (does not switch the device
on and off). Devices which cannot be switched on
and off using the ON/OFF switch are hazardous,
should not be operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning
and maintenance. Such a preventive measure
reduces the risk of accidental activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device
who have not read the user manual. The device
may pose a hazard in the hands of inexperienced
users.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried
out by qualified persons, only using original spare
parts. This will ensure safe use.
f)
To ensure the operational integrity of the device,
do not remove factory-fitted guards and do not
loosen any screws.
g)
Do not leave this appliance unattended while it is
in use.
h)
Clean the device regularly to prevent stubborn
grime from accumulating.
i)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
j)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
k)
Keep the device away from sources of fire and
heat.
l)
Do not use the sauna for more than 30 minutes
one time. Using the sauna for too long can cause
an accelerated heartbeat, gentle headaches, the
feeling of weakness or dizziness. You should end
your sauna bath immediately if you experience
any of these symptoms.
m)
Before using the sauna, you should contact your
doctor, especially if you are:
pregnant
suffering from heart disease
suffering from hypertension
suffering from cardiovascular disease
under the influence of alcohol
after taking medicine
suffering from diabetes
feeling ill
n)
Children using the sauna must remain under
adult supervision.
o)
The risk of burns: Do not touch the sauna heater
during its operation because it is very hot. Keep at
least 30 cm away from the warmed sauna heater.
7
EN
ATTENTION! Despite the safe design of the
device and its protective features, and despite
the use of additional elements protecting the
operator, there is still a slight risk of accident or
injury when using the device. Stay alert and use
common sense when using the device.
3. USE GUIDELINES
The device is designed to control the sauna heater.
The UNI_SAUNA_C01 controller is compatible with the
UNI_SAUNA_V9.0KW, UNI_SAUNA_V6.0KW sauna heater.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
4
2
3
5
1.
Display
2.
Sauna lamp on/off switch
3.
Sauna heater on/off switch
4.
Temperature regulation
5.
Time regulation
6.
up (increases a value)
7.
down (decreases a value)
CAUTION: The main switch-on knob is located on the
electrical box.
3.2. PREPARING FOR USE
INSTALLATION
Install the controller and electric box next to the sauna
room (NOT inside the sauna room) in a dry place, about
170 cm above the ground. The electric box can be
installed, for example, several centimeters above the
controller, so that there is an easy access to the main
switch-on knob. Install the temperature sensor on the
wall inside the sauna room. When installing the sensor,
consider the instructions in the sauna heater manual
and in this manual.
ATTENTION! This product's view can be found on the
last pages of the operating instructions (pp. 27).
Placement diagram of the sensor and sauna heater
W.
sauna heater
X.
sensor
Y.
upper bench
Z.
bottom bench
Heater model
A min [mm]
120
UNI_SAUNA_V6.0KW
130
UNI_SAUNA_V9.0KW
1
6
7

Publicidad

loading