Seek Thermal AttackPRO Manual Del Usuario página 11

Safety and usage information
9. Do not use the battery if, when you use, charge, or place the
battery in storage, there is an unusual smell from the battery, or it feels
hot to the touch, or changes color, or changes shape, or is an otherwise
unusual condition.
10. Only use a seek thermal specified battery charger when you
charge the battery. otherwise, damage to the battery can occur.
11. Do not put the battery in a fire or increase the temperature of
the battery. Do not leave the batteries in direct sunlight for extended
periods of time. Damage to battery can occur.
12. Remove any water or moisture from the battery before you install
it. Do not apply solvents or equivalent liquids to the camera, cables, or
other items. Damage to the components can occur.
13. It is important to test the thermal imager and any other associated
accessories prior to use to ensure that the equipment is functional
before entering a hazardous environment. Always perform a visual
and functional check on the equipment to validate that it has not been
damaged or degraded prior to use.
14. The thermal imager is a navigational tool which provides a thermal
image in conditions where vision is impaired. The user should follow
safety precautions and protocols and stay within communication range
of the incident command structure.
15. Do not point the infrared camera at strong energy sources, for
example, devices that cause laser radiation, or the sun. This can affect
the accuracy of the camera and cause damage to the detector.