Venen Engel 4 Manual De Instrucciones página 39

IMPORTANT INFORMATION REGARDING ELECTROMAGNETIC COMPATIBILITY (EMC)
1) This product needs special precautions regarding EMC and needs to be installed and put into service according to the EMC
information provided, and this unit can be affected by portable and mobile RF communications equipment.
2) Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect
operation of the unit.
3) Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation!
4) Caution: this machine should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is
necessary, this machine should be observed to verify normal operation in the configuration in which it will be used
The device is intended for use in the electromagnetic environment specified below. The customer of the user of the device should assure
that it is used in such an environment.
Emission test
RF emissions CISPR 11
RF emission CISPR 11
Harmonie emissions
IEC 61000-3-2
Voltage fluctuations / flicker
emissions IEC 61000-3-3
Guidance and manufacturer's declaration - electromagnetic emission
Compliance
Group 1 The device uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
Class B The device is suitable for use in all establishments, including domestic
establishments and those directly connected to
Class A
the public low-voltage power supply network that supplies buildings used
for domestic purposes.
Complies
Electromagnetic environment
- guidance
39