General Electric Profile 473 Manual Del Propietário página 7

About your dryer features.
Color Logic
Select the correct FABRIC CAREsetting.
Match the particular color below the words
with the same color on the Cycle Dial.
Example: D rying a load of clothing labeled
permanentpress.
[-_ Choose the FABRIC CAREsetfing--for
this load it would be the EASYCARE MED.
HEAT(which is a particular color).
Turn the Cycle Dial to the area that has
the same color asthe FABRIC CARE
setting you have chosen-for this load it
would be the EASYCARE AUTOMATIC.
SensorDry
SensorDry (on some models)
This feature is only activated in the
automatic cycles.
As the clothes ramble they touch a large
sensor. The SensorDryfeamre will stop
the heating cycle as soon as the clothes
have reached the selected duness.
Extra Care
EXTRA CARE..............
Use this option to minimize the wrinkles
in clod_es. It provides approximately 15
minutes of no-heat rambling after dm
clothes are d U.
This option can only be used wid_ tt_e
Automatic cycles.
If you are using the END OFCYCLE SIGNAL
and you select the EXTRACARE opOon, a
signal xdll sound at the end of the (h)dng
time and several umes during the EXTRA
CARE(.Tcle. This will remind you tidal it is
time to remove tt_e clodms.
7