Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
ON/OFF
1. Press the POWER button (1) to switch the appliance on.
2. Press the POWER button (1) to switch off the appliance.
CLOCK ADJUSTMENT
1. Press the POWER button (1) to switch the appliance on.
2. Long press the CLK button (9) until the display shows the flashing time.
3. Turn the Volume Control (2) clockwise / counterclockwise to adjust the current time. Press the CLK button (9) to confirm.
4. Turn the Volume Control (2) clockwise / counterclockwise to adjust the current minutes. Press the CLK button (9) to
confirm.
SOURCE SELECTION
Press the MODE key (18) in sequence to select the RADIO, DISC, USB, AUX, BT sources.
AUDIO CONTROLS
VOLUME ADJUSTMENT
Turn the Volume Control (2) clockwise / counterclockwise to increase / decrease the volume.
LOW / HIGH TONE ADJUSTMENT
1. Press the SEL (2) button once to select the bass setting.
2. The "BASS" low tone level indication appears on the display.
3. Turn the Volume Control (2) clockwise / counterclockwise to increase / decrease the low tone level.
4. Press the SEL key (2) twice to select the high tone adjustment.
5. The "TRE" high tone level indication appears on the display.
6. Turn the Volume Control (2) clockwise / counterclockwise to increase / decrease the treble level.
BALANCE CONTROL / FADER
1. Press the SEL key (2) three times to select the channel balance.
2. "BAL" appears on the display.
3. Turn the Volume Control (2) clockwise / counterclockwise to balance the sound on the left / right channel
4. Press the SEL key (2) four times to select the fader setting.
5. "FAD" appears on the display.
6. Turn the Volume Control (2) clockwise / counterclockwise to adjust the sound on the rear / front speakers.
ADDITIONAL SETTINGS
EQUALIZER
- Press the SEL key (2) five times to select the preset equalization. It is possible to choose between CLASS, ROCK, POP,
FLAT, OFF (no equalization).
Note: Selecting a preset equalization can not adjust the high / low tone values.
LOUDNESS
- Press the SEL key (2) six times to activate / deactivate the LOUD function (bass boost).
DX / LOCAL (available in Radio mode)
DX: during the automatic search for radio stations, all stations will be received, even those that are disturbed.
LOCAL: during the automatic search for radio stations, only the stations with the strongest signal will be received.
STEREO / MONO (available in radio mode)
STEREO: set to listen to the radio in stereo.
MONO: set to listen to the radio in mono.
RADIO
AUTOMATIC TUNING
1. Press the BAND button (19) to select the frequency band (FM1 / FM2 / FM3) you want to listen to.
2. Press the >> I (7) button to automatically tune to the next station.
3. Press the I << (8) button to automatically tune to the previous station.
4. If the TA function is activated, only stations that broadcast traffic reports will be tuned.
5. If the PTY function is activated, only stations that transmit the specified program type will be tuned.
12
XCD 5790 DAB
Publicidad
