Trevi XCD 5790 DAB Manual De Uso Y Conexiones página 14

ENGLISH
DVD OPERATION
- Refer to the CD reading instructions for disc insertion and basic functions.
- For the advanced functions of the DVD player, see the instructions of the remote control.
Further options are available in the DVD player menu by pressing the SETUP key (15).
In particular, it is possible to set:
- Parental control (rating)
- Return to initial settings (default)
- Display and image settings
USB INPUT
1. Insert a USB device / MP3 player into the USB input (5).
2. Playback will start automatically and the track number will be shown on the display.
3. For the playback functions, refer to the chapter "CD OPERATION".
NOTE: The XCD 5770 USB car stereo may not support some external devices with a USB port, this is due to the incompatibility of
the processors.
INPUT AUX IN
1. Press the MODE key (18) in sequence to move to the AUX source.
2. Connect any unit with audio output to the AUX input (17).
3. Command the outdoor unit from its commands.
BLUETOOTH (HANDS-FREE MODE)
You can make calls from your mobile phone in HANDS-FREE mode (in free mode) thanks to compatibility with the inter-
national Bluetooth wireless system.
- When making a call, speak loud and clear.
- To have an optimal condition before making or receiving a call, close the car windows.
- The voice can be reproduced in a distorted way if there are problems with the telephone field.
- Use of the HANDS-FREE function depends on the partial / total compatibility of the mobile phone.
- Make sure that the Bluetooth connection is available on your mobile phone.
CONNECTION
1. Press the MODE key (18) in sequence to switch to the BT source and activate the Bluetooth function of the mobile
phone. Search for accessories / audio devices.
2. From the mobile phone select the CAR KIT device that corresponds to the car radio.
3. If required, enter the 4-digit code "0000".
4. Now the connection is established, the word LINKED will appear on the car radio display.
RECEIVING / REJECTING / TERMINATION OF A CALL
1. When you receive a call, listening to the playback source will stop and you will hear the ringing sound.
2. Press the button (19) to start the conversation or press the button (18) to reject it.
- The audio of the conversation will be audible from the car's audio system.
- During the call the car radio functions will be interrupted.
3. Press the button (18) to end the conversation.
- At the end of the conversation, listening to the source being played will automatically be resumed from where it was
interrupted.
AUTOMATIC ON
1. When the radio is switched off in stand-by mode, if a call is received from the paired Bluetooth device, the car radio will
automatically switch on in order to use the HANDS-FREE function.
2. At the end of the call the car radio will automatically go back to stand-by mode.
14
XCD 5790 DAB