Publicidad
Note: When you lock the scooter, it remains in standby mode and continues to use power. You can switch off the scooter to reduce power consumption. In this case, the motor
will no longer be blocked until the scooter is switched on again. When you turn the power back on, the block will remain in effect until you deactivate it.
When you use SoFlow App to connect to the scooter, it is suggested to keep internet connection with the phone. If the phone loses the internet connection, keep SoFlow
app open in the background. By doing this you can continue using all the app functions including NFC. If you close the app completely while not having internet
connection, you can only connect again to the scooter after internet connection is available again
4.6 NFC
You can use NFC to lock and unlock the scooter.
The location of NFC is shown in the figure.
Use your phone to touch the NFC area.
For Android, open the SoFlow App, connect your scooter, and then touch NFC to lock or unlock it.
For iOS, except operating as Android you also need click the notification shown as below to lock or unlock your scooter.
copyright by www.soflow.comm
21
Publicidad
