hillvert HT-IRI-06 Manual De Instrucciones página 15

1 - 3/4" thread (inlet)
2 - display
3 - control buttons
4 - port of the rain sensor cable
5 - irrigation hose connection (outlet)
6 - battery compartment
3.2.
Preparation for operation
Assembly
1) Unscrew the two screws of the battery compartment cover on the back
of the device.
2) Insert (or replace) two AA batteries in the compartment and make sure
they are installed in accordance with polarity indicators.
3) Close the battery compartment cover and secure with screws.
4) Connect the unit directly to a 3/4" (20mm) tap.
5) Connect the lower connector (outlet) to the irrigation hose.