Tristar HD-2316 Manual De Instrucciones página 11

Rated Frequency:
Switch
Switch A
A0=appliance off
A1+B1 = 50W Less Exit Air
A1+B2 = 900-1000W Less Exit Air
A1+B3 = 1800-2000W Less Exit Air
A2+B1 = 50W More Exit Air
A2+B2 = 900-1000W More Exit Air
A2+B3 = 1800-2000W More Exit Air
Using the dryer
•
After washing rinse your hair with a towel and then use the dryer. Plug in
appliance and select the switch position for the right temperature and
airflow.
•
When drying your hair ,you can use this
•
appliance without concentrator nozzle;
•
When making up your hair , you can add the
•
concentrator nozzle.
•
Select the cool shot position . Using the cool
•
shot gives a good protection to your hair, which has been dried and
made up.
•
After using , please place the switch at "0", position and then disconnect
the dryer.
•
After turning on the relevant 'wind speed'&'power', if inquired, just press
"TURBO",
•
The power will be added 50W, and the wind will become stronger. This
extra power will get the best result for drying your hair quickly!
Advert
•
Never use in the bathtub, shower, or over a filled sink.
50/60Hz
Switch B Switch C(Cold)
A1+B+C=Less
Cold Air
A2+B+C=More
Cool Air