rivacase VA2540 Manual Del Usuario página 2

Thank you for purchasing the RIVACASE portable battery.
Read all instructions and warnings carefully before
using the RIVACASE portable battery.
Product package:
• RIVACASE portable battery
• User manual
• Type-C cable
Specifications:
Model: VA2540
Battery: Li- Polymer 3.7 V
10000 mAh 37 Wh
Input: Micro USB 5 V 2 A / 9 V 2 А (Support QC 3.0)
Type-C 5 V 3 A / 9 V 2 А (Support QC 3.0/PD 3.0)
Output: USB1 5 V 3 A / 9 V 2 А / 12 V 1.5 А (Support QC 3.0)
USB2 5 V 3 A / 9 V 2 А / 12 V 1.5 А (Support QC 3.0)
Type-C 5 V 3 A / 9 V 2.2 А / 12 V 1.5 А (Support PD 3.0 20W)
Fully charged RIVACASE VA2540 is enough to charge most
smartphones up to 2.5 times or to charge most Tablets
up to 1 times (depending on the device battery capacity).
Safety protection
Over charge | Over discharge | Short circuit protection | Over current | Over voltage
Operating instructions
Fully charge the RIVACASE before the first use. To charge the RIVACASE portable battery, plug the
cable into input port (2) or (3), then connect the other side of the cable to the USB computer port,
A/C power outlet using USB power adapter (not included) or car charger. We recommend using
RIVACASE QC 3.0 charger (RIVACASE VA4110 or similar). Approximate full charging time is about
3 hours (using QC 3.0 charger).
LCD display shows battery level. Press button to check battery level. LCD Display blinks during
recharging. Disconnect the cable after charging the portable battery.
To charge the electronic device, plug the cable into portable battery output ports (1), (3) or
(4), then connect the other side of the cable to the electronic device. The charging will start
automatically and LED lights will be on, displaying the charging level. When charging is
completed, unplug the cable from portable battery and the mobile device. To check battery level,
press button. LCD display (5) shows battery level.
Quick Charge
RIVACASE VA2540 supports Quick Charge 3.0. Please connect the device to socket, and appropriate
mode will be selected. To recharge RIVACASE VA2540 using Quick Charge charger, connect it to
Micro USB/Type-C socket.
Power Delivery
RIVACASE VA2540 supports Power Delivery 3.0 20W. Please connect device to Type-C output
(3), and appropriate mode will be selected. To recharge RIVACASE VA2540 using Power Delivery
charger, connect it to Type-C socket.
Charge-through function
Connect the portable battery to the power source and your mobile device to the portable battery.
Mobile device is charged first. When fully charged, portable battery will start recharging.
Type-C input / output
You can use Type-C socket to charge devices and recharge RIVACASE VA2540 itself.
Do not store RIVACASE portable battery discharged; this can damage the battery. To check the
battery level, press the button.
EN