Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATION
Age
Loading limit
Weight
Frame
Tyres
Rims
Height of seat bars
Brakes
Width of handle bars
Height of handle bars
Length
Accessories
Dear customer,
Thank you for purchasing our product. It is our duty to inform you that this bike, in its basic
version, is designed for mild terrain and non-vehicle roads. To meet all the requirements (of a
country where our product is to be used) needed for the bike to be used on a road for vehicles
it is vital to add further safety features (such as refl ectors, etc.) and to always use a helmet. All
information and useful equipment can be found at a professional service center. Furthermore
it is necessary to give detailed instructions to the rider on the safe usage of a children's bike
according to road regulations. It is also vital to explain the proper use the brakes to the child
(front 'V' brake, back 'V' brake or reverse pedal brake). Our product will be long lasting when
properly used, maintained, and serviced. It is important to have a perfectly aligned bike,
especially wheel bearings that substantially aff ect rolling counteraction during the ride, main
set up, brakes, screw connections, wheel pressure, and proper tension of the drag-chain.
Therefore we highly recommend service by a professional who is supplied with appropriate
tools. As a consequence our product will be at your service for a long time to come. Do not
forget we off er a wide range of bicycles, scooters, and training bikes. You can choose among
many diff erent models and sizes for diff erent age categories and diff erent uses, (see the back
page or www.yedoo.eu). If you have any comments or ideas on how to improve the quality
of our products and services do not hesitate to contact us at obchod@intrea.cz.
PARAMETERS OF JOINT TIGHTENING
During assembly, set up, adjustment of the seat, adjustment of the handle-bar position etc.,
it is vital to keep the minimum and maximum torsion moment (Nm) of joint tightening
according to their type.
1. Attachment of the stem (a screw constricting the height of the handle-bars) min.- max.
2. Attachment of the handle-bars (a screw on the stem constricting the handle-bars together min.- max.
3. Attachment of the seat (a screw attaching the seat to the seat post) min.- max.
4. Attachment of the seat post (a screw adjusting the height of the seat) min.- max.
5. Hubs (screws attaching the hub) min.- max.
6. Pedals (a screw on the axis of the pedal attaching the pedal with a latch) min.- max.
7. Additional wheels (additional metal nuts on the back wheel hub attaching the additional wheels) min.- max.
Recommended extent level of tightening torque (Nm) of the screw joints of the following parts:
Stem of the handles
Bike model
Handle
Tube
Children bike
12" , 16"
18–20
14–16 14–16 Ø 8 mm: 16–18
PIDAPI 12
3+
75 kg
ALU: 7,2 kg
I
STEEL: 7,9 kg
ALU: Aluminium
I
STEEL: Steel
Air 12"
Alu
45/56 cm
"V" Alu, Pedal (Torpedo)
52 cm
70/74 cm
92 cm
Add. wheels
Seat post
Saddle
Frame
bars
Ø 6 mm: 10–12
PIDAPI 16
4+
75 kg
ALU: 9,0 kg
I
ALU: Aluminium
Air 16"
Alu
54/63 cm
"V" Alu, Pedal (Torpedo)
55 cm
80/84 cm
113 cm
Stand
Hub
Front wheel /
Back wheel /
frame
frame
24–28
24–28
STEEL: 10,5 kg
I
STEEL: Steel
Training
Pedals
wheels
30–45
24–28
8
|
Publicidad
