Inateck BCST-60 Guia Del Usuario página 2

Laser Window /
Laserfenster /
読み取り窓 /
Faisceau Laser /
Finestra laser /
Ventana láser
Trigger /
Auslöser /
トリガー /
Trigger /
Pulsante scan /
Gatillo
Buzzer /
Signaltongeber /
ブザー /
Buzzer /
Segnale buzzer /
Señal de alerta
USB Port /
USB Anschluss /
USB ポート /
Port de USB /
USB Port /
Puerto USB
LED1
LED2
Shockproof Cover /
Stoßfeste Abdeckung /
耐衝撃カバー /
Couverture anti-choc /
Scocca anti urti /
Protección anti golpes
Use of Inateck BCST-60
EN
Startup
Note:
1) Inateck BCST-60 will start sleep mode if there is no operation on it over 3 minutes.
2) When the distance between Inateck BCST-60 and its adapter exceeds the effective
Wireless Mode:
Power Switch /
1. Insert the 2.4G USB adapter into the USB port of computer.
Netzschalter /
電源スイッチ /
Interrupteur d'alimentation / 2. Power on Inateck BCST-60 by toggling switch from OFF to ON. Short press the
Interruttore alimentazione /
Interruptor de alimentación
3. Open a file on computer and move cursor to the blank where scanning output
Wired Mode:
1 2
Short press on the trigger can wake it up.
range, scanned data will be kept in the buffer of Inateck BCST-60. Quickly double
press on the trigger can upload data from buffer.
trigger to emit red laser beam and scan barcodes.
should be placed. Scanning results can be displayed on computer then.