Descargar Imprimir esta página

Cardin FT201 SINCRO Instrucciones Para La Instalación página 21

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
GB
swivelled horizontally or vertically (Figs. 7). Besides this, the
receivers are fitted with a red LED that switches off when the
photocell is centred.
We recommend centring even if you hear the receiver click.
Check functioning by passing in front of the infrared ray several
times (the red LED on the receiver should turn on and the relay
should switch). Repeat this also after the covers of the receiver and
transmitter have been positioned.
The centring filter is used for an additional test and to be sure that
even in the worst conditions, like fog or rain, everything works
properly.
The test is quick and simple: place the film on one of the fronts (Fig.
8) and check that the photocell is working properly. If it does not it
means we are either at the limit of its range or alignment is not
accurate.
Attention: remember to remove the plastic film when you have
finished testing.
FINAL ADVICE
The non-observance of the said instructions could prejudice the
correct function of the equipment.
Cardin decline any responsibility for possible malfunction and/or
damage due to their non-observance.
Cardin srl reserve the right to make modifications at any time
they deem necessary in order to improve the aesthetical and/or
functional aspect of the product.
21

Publicidad

loading

Productos relacionados para Cardin FT201 SINCRO