Orbegozo ADR 91 Manual De Usuario página 25

MANUAL USUARIO ADR 91
Sleep operation
−
This feature can be only activated from the remote controller
−
To activate SLEEP feature, the set temperature will increase by 1ºC/2ºF(or 1ºF) in 30 minutes.
−
The set temperature will then increase by another 1ºC/2ºF(or 1ºF) after an additional 30
minutes. This new temperature will be maintained for 7 hours before it returns to the originally
selected temperature. This ends the Sleep mode and the unit will continue to operate as
originally programmed.
−
NOTE: This feature is unavailable under FAN or DRY mode.
Other features
−
Auto-Restart
o If the unit breaks off unexpectedly due to the power cut, it will restart with the previous
function setting automatically when the power resumes.
o Wait 3 minutes before resuming operation
o After the unit has stopped, it cannot be restarted operation in the first 3 minutes. This is
to protect the unit. Operation will automatically start after 3 minutes.
− POWER MANAGEMENT feature
o When the ambient temperature is lower than the setting temperature for a period of
time, the unit will be automatically operate power management feature.
o When the ambient temperature is higher than the setting temperature, the unit will be
automatically quit the power management feature. The compressor and fan motor
stop. The compressor and (or) fan motor run.
Air flow direction adjustment
− The louver can be set to the desired position
manually.
− Do not place any heavy objects or other loads on
the louver, doing so will cause damage to the unit.
− Ensure the louver is fully opened under heating
operation.
− Keep the louver fully opened during operation.
25