Publicidad
Idiomas disponibles
Idiomas disponibles
Design & Function
Intended Use
The Residual Limb Support system increases user comfort and supports a residual
limb with multiple angles of adjustment and features an easy-to-clean cover.
The Residual Limb Support allows the client to remove the pad or swing it away
while keeping the installed foot rigging in place.
Features
The Residual Limb Support system features:
•
easy swing-away and removal for greater assistance in client transfers;
•
full tilt angle adjustability;
•
multiple mounting configurations;
•
a track that promotes easy length adjustability; and,
•
a soft, non-abrasive cover to increase user comfort.
Mounting Options
The Residual Limb Support system is able to be mounted in the following ways:
•
clamp-style cane mounting; and,
•
track-style chair mounting.
Mounting the Hardware
There are two ways of mounting the Residual Limb Support hardware, detailed
below.
To install the clamp-style (RLSPKG100) hardware:
1. Interlock the opposing ends of the tube clamp around the wheelchair frame.
2. Tighten the screw (C) through the adjacent holes on the clamp with a 3/16" hex
key.
1
EN
Publicidad
