Stealth Products RLSPKG100 Manual De Usuario página 8

Installation
To install the pad to the hardware:
1. Unzip the pad cover to reveal the back of the pad, which contains several t-nuts.
Choose the desired hole locations for the mount. Zip the cover back in place and
mark the locations of the desired mounting holes.
2. Using an awl or other pick-like object, create holes through the back of the fabric
in the desired mounting location. There should now be two holes in the fabric
which match up with the two corresponding t-nuts.
3. Using a 5/32" hex key, screw the two (2) 10-32 x 3/4" socket head screws through
the female cane clamp and into the screw inserts in the back of the pad. Tighten
the screws to secure the female cane clamp in place.
4. Loosely insert the tab on the male tube clamp into the groove provided on the
female clamp and slide the swing-away tube clamp to the desired location in the
clamp assembly.
5. Using a 3/16" hex key, tighten the two (2) 1/4-20 socket head screws into the two
inserts on top of the male cane clamp to lock the pad in place on the cane.
1.
3.
3
2.
4.
EN