Skiddoü Berit Manual De Usuario página 7

1. List of parts:
2. Assembly instructions:
Before assembly, remove the black protection cover from the front wheel axle. Check that the front wheel
axle joint cap (D) is fitted as shown in figure 1A, if not, fit it as shown in figure 1B. Note that there is a hole
in the cap, which must overlap the hole in the axle. Fit the frame (A) by placing it over the front wheel axle.
The screw holes at the bottom of the axle should be located on the inside of the ride-on toy (fig. 2). The
next step is to mount the handlebar (C). After taking it out of the packaging, take the assembly spanners
(fig. 3) and remove the screw. Then slide the handlebar onto the axle as shown in figure 4. The holes in the
handlebar and the axle should overlap (fig. 4A). Put the bolt (F) through the hole and tighten it with the
assembly spanners (G) (fig. 4B). Slide the cap (E) downwards and turn it clockwise until you feel resistance
(fig. 5). A correctly assembled product is shown in fig. 6.
3. Cleaning and maintenance:
Clean using a wet and soft sponge or cloth. Protect the product against moisture, water and extreme
temperatures.
4. Warranty conditions:
1. The warranty is provided by skiddoϋ Polska Sp. z o.o. with its main office at Kopanina 34, 60-105
Poznań, Poland.
2. The warranty covers skiddoü brand products.
3. skiddoϋ Polska Sp. z o.o. guarantees correct functioning of the product according to technical
conditions of use described in the user manual.
4. The warranty covers a period of 24 months, starting from the product sale date. If the product is
purchased by a company (VAT invoice), the warranty covers a period of 12 months.
5. The warranty cover may be extended for further 12 months. The extension may be obtained by
registering the product, filling a form available on the website: www.skiddou.com.
6. The warranty is valid in the country of purchase.
7. The warranty of the manufacturer is non-transferable and may be used to make claims by the first
buyer only.
8. Identified faults shall be removed free of charge by the Guarantor during the warranty period.
9. The customer (reporting a complaint) shall be obliged to report a complaint via the www.skiddou.com
website. The instructions for reporting a complaint and sending a faulty product is available on the
website.
10. Any faults or damage to the product identified and reported during the warranty period shall be
removed free of charge, as quickly as possible, within 21 working days from the time the Guarantor
receives the faulty product. In justified cases, this period can be extended by 30 days.
11. Equipment faults or damage should be reported to the Guarantor immediately after the discovery.
12. The customer shall have the right to exchange the product for a different product with identical or
similar technical parameters (including colours), if the Guarantor deems the fault to be irreparable.
13. The warranty shall be respected only if damage description and all accessories received by the
customer upon purchase, together with the proof of purchase indicating the date of sale are
attached to the returned product.
14. The warranty excludes: natural wear and tear during use, damage caused by abuse and
misuse contrary to the user manual, damage or tear caused by the buyer, textile colour fading
caused by long-term influence of sunlight, washing at an incorrect temperature, mechanical,
electrical, thermal damage, penetration of liquids or purposeful damage and faults caused by it,
unauthorised modifications.
no.
A Frame with the rear wheel and the seat fitted
B Axle with front wheels fitted
C
D Front wheel axle joint cap
E Handlebar joint cap
F Handlebar assembly bolt
G Set of assembly wrenches
element
Handlebar
7