EN
Box content
1
Electric stirrer VIMCC1400A
1
Mixing paddle
2
Carbon brush
2
Spanner SW 22
1
Instruction manual
sYMBologY
Safety warnings and
precautions.
All users must read
the instruction manual
to avoid injuries.
Risk of electric shock.
Hazard of fire
or explosion.
Double insulation.
Respect the safety
distance.
Recycled material
packaging.
Separate collection
of batteries
and / or power tools.
2. general use &
safetY Warnings
While
using
equipment, several basic safety
precautions must always be followed in
order to reduce the risk of fire, electric
shock and personal injuries.
Read and understand the manual
prior to operating this tiller. Save
these instructions and other documents
supplied with this machine for future
reference.
2.1 - general
These preventive measures are
essential for your safety. Always
use this tool with care in a responsible
manner having in consideration that its
user
is
accidents caused to third parties or
their goods.
Make sure that all individuals using this
tool have had the necessary training
and have read and fully understand
these operating instructions. Before
operating it for the first time, its user
must be instructed by the vendor
or a competent person about its
functionalities.
This instruction manual is an integral
part of this machine and must always
be provided.
Get familiar with the equipment's
control devices and operation. The user
must know how to stop the equipment
immediately.
Always pay attention when operating an
electric tool. A moment of inattention
may result in serious injuries.
Use this equipment only if you are in
good physical and mental conditions.
Do not use it if you are tired or under
the influence of alcohol, drugs or
medication. If you suffer from any
health problem, please ask your doctor
about the possibility of using the tool.
Never allow this machine to be used by
children, people with limited physical,
sensorial or mental capabilities, with
agricultural
lack of experience and knowledge of
this equipment and who is not familiar
with the instructions.
This electric tool must only be
operated as described in this
instruction manual. No other use is
allowed besides the described.
Do not overload the equipment and use
it properly for each type of work. Using
it for purposes other than the intended
may result in dangerous situations.
responsible
for
eventual
For safety reasons, any changes other
than the assembly of accessories
authorized by the manufacturer are
prohibited. Any changes made void the
warranty.
You can obtain any information about
the authorized accessories through
your VITO official distributor.
2.2 - electrical safetY
This tool possesses double
insulation, which means that
every external metallic part is isolated
from
the
electric
Therefore, and in accordance with the
regulation EN 60745, it is not
necessary any earth connection.
However, double insulation does not
replace the regular safety precautions
that must be followed while using the
equipment.
The power cable must be plugged into
an electrical outlet with a differential
protection.
If the working area is extremely hot,
damp or with high dust concentration,
the power outlet circuit must be
protected with a circuit breaker
(30mA), to ensure the user's safety;
Do not use power tools in
explosive
environments,
especially in the presence of flammable
liquids, gases or dusts. Power tools
create sparks that may ignite liquids,
gases, or dust.
The supply voltage must match the
technical specifications of the power
tool.
Do not expose power tools to rain or
use them in wet or damp environments.
The presence of water inside an electric
tool increases the risk of damage and
electric shock to the user.
Hold the equipment by the
isolated parts that avoid any
electric shock if it touches any hidden
wire during the operation.
components.
21