OZU UM-004 Manual De Instrucciones página 31

medical electronic devices, such as cardiac pacemaker, arti cial heart and lung
and other medical electronic devices with fuels life, electrocardiograph and other
medical electronic devices, otherwise it will lead to danger.
⑹Do not use the product in the place where is direct sunlight, high heat,
in ammable, electromagnetic radiation and humid.
⑺Do not disassemble, repair and transform the therapeutic apparatus, otherwise
cause failure or get an electric shock accident.
⑻The therapeutic apparatus should be placed in the position which is easy to
move the plugs to use, it is easy to move the plugs in emergency circumstances.
⑼Check the equipment before each use to avoid the exposed wires caused by
accidental damages or other reasons.
⑽Dust may a ect the performance of the unit, please use a dry soft cloth to clean
the device as needed.Please check whether the electrode is loose before each use,
otherwise it may have adverse e ects on performance or cause other problems.
9. Product maintenance
1)Before turning on the main unit, please check whether the battery is charged;
2)If the apparatus runs normally, show key invalidly after press. To turn it o after a
few seconds and then opening, if still not normal, check whether it is broken for
the apparatus;
3)If all operation of the apparatus are normal but without output (the user without
feelings) after turn it on. Please check whether the electrode pads is directly
contacted with skin, the contacting parts whether has hair, clothes and so on;
4)While cleaning, shutdown rst, let the electrode wires stay away from the electric
supply socket. You can wipe by using soft cloth or towel with a little water and
after dry.
5)After each use, please clean electrode pads, you can wipe by using soft cloth or
towel with a little water and after dry, when conducting electrode pads are
particularly dirt, you can wipe by using soft cloth with a little medicinal alcohol
(alcohol concentration as 75%).
6)The apparatus should be placed in the place which is dry, ventilated and good
insulation use.
7)When the apparatus is moved, must be handled with care, avoiding the shake.
8)The apparatus should be checked the batteries condition, to check whether the
output is good, if has abnormal conditions, you should pay attention to it and
service it in time.
9)The apparatus' shell board should be pay attention to protection, avoiding the
abrasion.
10)The non-professional cannot disassemble the host to avoid getting an electric
shock or damaging the apparatus, an accident can happen because of it, all at
your peril.
EN - 10
!