3. OPERATION
UK
1. Unplug the unit from the electrical outlet.
2. Remove the drain plug (fig. A). During this operation, residual water may spill out, so a container
must be provided to collect the water.
3. Connect the drain hose (1/2" or 12.7mm, may not be supplied). (fig B)
4. Water can be continuously discharged through the hose to a floor drain or bucket.
5. Turn on the device.
1
3.14 CLEANING
Before cleaning or maintenance, turn the appliance off by pressing the
button on the control
panel or remote control, wait for a few minutes then unplug from the mains socket.
Cleaning the cabinet
You should clean the appliance with a slightly damp cloth then dry with a dry cloth, may not used
water to wash appliance.
● Never wash the appliance with water. It could be dangerous.
● Never use petrol, alcohol or solvents to clean the appliance.
● Never spray insecticide liquids or similar.
Cleaning the air filters
To keep your appliance working efficiently, you should clean the filter every month ofoperation.
The evaporator filter can take out like fig.
TAC-23WC
40