(3) Rinse the water tank timely with fresh running water at least three times which help
clean the remaining detergent and avoid any damage to the internal parts of the water
tank.
REMOTE CONTROL
1.
Included a button cell battery (the type of battery CR2025). Storage the remote
control at the back of the fan. Note: Please take out the insulation film under the
battery for first time use (Fig 7).
2.
The Remote Control button is labeled as such (Fig 8). All the functions performed with
the Remote Control work identically to the Manual Controls.
OPERATION
The FAN may be operated by the manual controls located on the FAN (Fig 9) or by your
remote control (Fig 8).
1.
Place the FAN on a stable flat surface. Plug the cord set into a 220-240V~ electrical
outlet. Plug on the FAN, existing room temperature will be displayed at display panel.
2.
POWER
: Turn the FAN on by pressing the 'POWER' button; Turn the FAN off by
pressing the 'POWER' button again.
3.
SPEED
: You can adjust the fan speed to the desired level: low, medium, or high by
pressing 'SPEED' . The speed setting is displayed on the LED panel (Fig 10) .
32
(Fig 7)
(Fig 8)
(Fig 9)