Publicidad
Idiomas disponibles
Idiomas disponibles
4.
MODE
: Pressing the 'MODE' button will set the FAN into NORMAL mode,
NATURAL mode , SLEEP mode and Child mode.
- NORMAL Mode
- NATURAL Mode
speed(5s) → high speed(5s) → medium speed(5s), it works as per this recycle.
- SLEEP Mode
for 30 mins, then transfer to medium speed for 30 mins and transfer to low speed until
fan stops working. 2）If you set the mode at medium speed, fan will work at medium
speed for 30 mins, then transfer to low speed and keep working until it is switched off.
3）If you set the mode at low speed, fan will work at low speed until the fan is turned
off. The LED Display will turn off if you don't control the fan in 30 seconds, touch any
button to turn on the display.
- Child Mode
And it will work at high speed for 15 minutes, and transfer to medium speed for 15
minutes, then transfer to low speed until it is turned off. You can turn off oscillation
function manually. The LED display will turn off if you don't control the fan in 30
seconds, touch any button to turn on the display.
5.
TIMER
: The fan is equipped with a timer that allows you to set its length of
operation from 1 hour to 12 hours. The LED Display will turn off if you don't control the
fan in 30 seconds, touch any button to turn on the display.
6.
OSCILLATION
oscillation function. The symbol is displayed on the LED panel.
7.
COOLING
again to turn off. If you want to operate the unit with water for better cooling, open
the water tank cover and fill it up to the MAX mark at the most. Take care when doing
so, to make sure, that no water enters the product, e.g. through the air inlet.
ATTENTION ABOUT ICE BOX
Then put a ice box in the water tank ( the ice box needs to be frozen for more than 3
hours), and the cooling effect is better ( Note: when the water tank is short of water, it is
forbidden to use, please add water in time).
8.
Display
: Can be switched off temporarily by pressing the LED button on the
remote or by pressing and holding the SPEED button on the control panel for more
than 3 seconds, the display will light up again once any control button is activated.
: Fan will start work at any speed you set up.
:Fan will start work at low speed(5s) → medium
: 1）If you set the mode at high speed, fan will work at high speed
: Fan will auto. set up timer at 3 hours, oscillation function will start.
: Pressing the 'OSILLATION' button will start and stop the
: Press 'COOLING' button to turn on the cold air function. Press button
(Fig 10)
33
Publicidad
