Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE YOU BEGIN
Description
Air compressor units are intended to provide compressed air to power pneumatic tools, operate spray guns
and supply air for pneumatic valves and actuators. The pumps supplied with these units have oil lubricated
bearings. A small amount of oil carryover is present in the compressed air stream. Applications requiring
air free of oil vapor should have the appropriate filters installed. Any other use of these units will void
the warranty and the manufacturer will not be responsible for problems or damages resulting from such
misuse.
QUICK REFERENCE
Recommended Oil (2 Options)
Single viscosity SAE 30 ISO100 nondetergent compressor oil. Part number ST125312AV (0.5
qt) or ST126701AV (4 qt).
10W30 synthetic oil such as Mobil 1
Oil Capacity
Approximately 52 oz.
UNPACKING
Do not lift or move unit without appropriately rated equipment. Be sure the unit
is securely attached to lifting device used. Do not lift unit by holding onto tubes
or coolers. Do not use unit to lift other attached equipment.
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Check for
loose, missing or damaged parts. Check to be sure all supplied accessories are enclosed with the unit. In case
of questions, damaged or missing parts, please call 888-895-4549 for customer assistance.
Do not operate unit if damaged during shipping, handling or use.
Damage may result in bursting and cause injury or property damage.
Required Items - Not Included
•
Oil
•
Concrete anchors
•
Isolation pads
•
Isolation valve
•
Power cord/electrical disconnect
or CE003200AV (1 qt).
®
1
Publicidad
