Publicidad
Idiomas disponibles
Idiomas disponibles
Lower Blower
Tube
2. Slide the nozzle onto the lower blower tube.
KNOW YOUR BLOWER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT.
Compare the illustrations with your unit to familiarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Throttle Position Lever
Throttle
Trigger
Starter
Rope
Fuel Mix
Fill Cap
Primer
Bulb
STOP SWITCH
The STOP switch is used to stop the engine.
To stop the engine, push and hold the STOP
switch in the STOP position until the engine
stops.
THROTTLE TRIGGER
The THROTTLE TRIGGER is used to select
the desired engine speed.
THROTTLE POSITION LEVER
The THROTTLE POSITION LEVER is de-
signed to allow setting engine speed during
blower use only. To avoid causing damage to
the unit, DO NOT attempt to use the throttle
position lever during vacuum use.
High- -Speed
Nozzle
Tab
Slot
OPERATION
STOP
Switch
Spark
Plug
Upper Blower Tube
Start Lever
Vacuum Handle
3. Turn the nozzle clockwise until a click is
felt to secure the nozzle to the lower blow-
er tube.
CONVERSION TO VACUUM
This unit can be converted for vacuum use by
installing conversion kit (585829501) avail-
able separately.
Lower Blower Tube
PRIMER BULB
The PRIMER BULB removes air from the car-
buretor and fuel lines and fills them with fuel.
This allows you to start the engine with fewer
pulls on the starter rope. Activate primer
bulbby pressing it and allowing it to return to
its original position.
CHOKE LEVER
The CHOKE helps to supply fuel to the engine
to aid in cold starting. Activate the choke by
moving the choke lever to the FULL CHOKE
position. After engine attempts to start, move the
choke lever to the HALF CHOKE position.
Once engine starts, move choke lever to the
RUN position.
- 5 -
High- -Speed
Nozzle
Publicidad
