Installation Instructions Location; Window Kit Installation - INVENTOR EPC-09 Manual Del Propietário

Fig. 5
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Fig. 6
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
or
Fig. 7
or
Fig.5
or
Fig.6
Fig.7
INSTALLATION INSTRUCTIONS (optional)
INSTALLATION INSTRUCTIONS
Location
• The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the
unit.
• The unit has casters to aid with placement, but it
should only be rolled on smooth, flat surfaces. Use
caution when rolling on carpeted surfaces. Do not
attempt to roll the unit over objects.
• The unit must be placed near a properly rated
grounded outlet.
• Never obstruct the air inlet or outlet of the unit.
• Allow at least 30cm of space from the wall for effi-
cient air-conditioning.
Window Slider kit Installation
Your window slider kit has been designed to fit most
standard "Vertical" and "Horizontal" window appli-
cations. However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of windows. Please refer
to Fig. 6 & Fig. 7 for minimum and maximum window
openings. Use the bolt to secure the window slider kit
(see Fig. 7a).
Note: If the window opening is less than the men-
tioned minimum length of the window slider kit, you
can shorten it by cutting it to fit the window opening.
Be sure to never cut off the hole in the window slider
kit.
bolt
Window sliderkit
11
bolt
or
Window sliderkit
Fig.7 a