Installation - INVENTOR M3GHP290-12 Manual De Usario

|Installation

|Installation
Choosing The Right Location
Recommend Installation
50cm
19.7inch
Tools Needed
Medium Philips screwdriver; - Tape measure or ruler; - Knife or scissors; - Saw (optional, to shorten
window adaptor for narrow windows).
Accessories
Check your window size and choose the fit window slider.
NOTE: Items with * are optional. Slight variations in design may occur.
EN
- The air conditioner should be placed on a firm foundation to
minimize noise and vibration. For safe and secure positioning,
place the unit on a smooth, level floor strong enough to
support the unit.
- The unit must be placed near a properly rated grounded
outlet.
- Allow at least 30cm of space from the wall for efficient air-
conditioning.
- Never obstruct the air inlet or outlet of the unit.
NOTE:
All the illustrations in this manual are for explanatory purposes
only. Your air conditioner may be slightly different. The actual
shape and size may vary.
The unit can be controlled by the unit control panel alone
or with the remote controller. This manual does not include
Remote Controller Operations, see the "Remote Controll
Illustration" packed with the unit for details.
There is the possibility of differences between the user's
manual and the illustrated photos of the remote control,
always refer to the manual for information.
11