Guardian Technologies CDAP4500 Instruciones De Uso Y Cuidado página 6

NOTE: Do NOT stick any foreign objects or your fingers inside of the unit.
CAUTION: Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in
the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.
TROUBLE SHOOTING GUIDE
PROBLEM
Unit does not operate.
Unit shuts off unexpectedly.
No air circulating from unit.
Increase in noise level.
App will not download.
Not "LINKING" / finding
Wifi or Bluetooth .
®
The Air Quality Monitor is
consistently reading high.
The light in the center of the
display screen is flashing red.
What is CADR?
CADR stands for "Clean Air Delivery Rate," which indicates the volume of filtered air delivered by
an air purifier. CADR ratings show the effectiveness of how efficient the air purifier is at capturing
fine particles from things like tobacco smoke and plant pollens from the room.
Clean Air Delivery Rate
From air cleaner to air cleaner, compare the CADR numbers. First look at suggested room size. Then refer
to the Clean Air Delivery Rate (CADR) numbers. The higher the number, the faster the unit filters the air.
Refer to website for individual model CADR numbers.
E-10
SOLUTION
Check that the unit is plugged in.
Check that filter is in place.
Confirm that filter is Genuine Replacement Filter
Call Customer Service.
Check that unit is plugged into a working
electrical outlet.
Check that HEPA filter is firmly in place.
Check that the Rear Cover is latched firmly in place.
Call Customer Service.
Unplug unit. Check Filter.
Clean Pre-/Carbon Filter if necessary.
Replace HEPA Filter if necessary.
Make sure the filters are clean. Replace if necessary.
Check to make sure you have most
recent update on smartphone.
Check that the device is plugged in. Make sure
smartphone is within arm's length of the purifier.
Make sure that light is blinking blue.
Clean out the sensor on the right side of the unit with
canned air or a vacuum hose.
On the Guardian Technologies App, hit the menu in
the top right button of the window and select
"Wifi Setting" button. Set up the connection again.