RedMax BCZ230S Manual De Instrucciones página 11

5. For safe operation
WARNING
The inside of the muffler contain chemicals that may be
carcinogenic. Avoid contact with these elements in the event
of a damaged muffler.
WARNING
Bear in mind that:
The exhaust fumes from the engine are hot and may contain
sparks which can start a fire. Never start the machine indoors
or near combustible material!
6. Set up
■ CONNECTING SWITCH WIRES
• Connect the switch wires between the
engine and the main unit. Pair the wires
of the same color.
■ INSTALLING HANDLE
• Mount the loop handle onto the shaft.
SE1
Note that the loop handle must be fitted
between the arrows on the shaft.
• Fit the clamp and screw. Do not
overtighten.
• Now adjust the trimmer to give a
comfortable working position. Tighten
the bolt. (SE1)
SE2
■ INSTALLING CUTTING ATTACHMENT GUARD
• Put the cutting attachment guard on the
gear box, attach it with the screws and
hardware provided. (SE2)
SE3
■ INSTALLING TRIMMER HEAD (SE3)
1. While locking the gear shaft, by
inserting the supplied tool into the
upper holder on the bevel gear.
2. Fit the trimmer head to the gear shaft
over the drive disk and spacer. Hand-
tighten it securely.
BCZ230S/BCZ230TS
TIGHTENING TORQUE:
7.7~30.9 in-lbs
(2.0~3.5 N.m.)
TIGHTENING TORQUE:
26~43.5 in-lbs
(2.94~4.9 N.m.)
US-9
U
S