Publicidad
Idiomas disponibles
Idiomas disponibles
The wireless siren PNI SafeHouse HS007LR is using advanced digital security technology
with good reliability and a low false alarm rate. Although the design is simple, it's function is
crucial: alerts in case of fire, gas leak, anti-burglary, sudden emergency. The product can be
used with the alarm system PNI SafeHouse HS550, PNI SafeHouse HS650, PNI SafeHouse
HS600 or it can be paired with optional multiple wireless detectors.
FEATURES
20 wireless defense zones
Maximum 5 wireless remote controller codes
Sound and strobe alarm
Wireless learning code for adding new
accessories
SPECIFICATIONS
Power supply: DC 12V 1000mA stand-by
Stand-by current: ≤ 7mA
Alarm current: ≤ 230mA
Wireless frequency: 433 Mhz
DESCRIPTION AND INSTALLATION
a. Initialization
Firstly, insert the power adapter connector into the stand-alone power supply socket, turn on
the power switch (red). The built-in buzzer will ring twice, the indicator light will flash twice.
b. Wireless or wired working mode
When the jumper is inserted in the "NO" position, this product is used as a wired siren.
When the jumper is inserted in the "NC" position, this product is used as a wireless siren.
Notes: only when the siren is in the wireless mode you can code remote
controllers, learn detectors and pair to an alarm system in wireless mode.
With wired mode selected, remote controller and detector do not work anymore, and the
siren would make sounds once connected to the power.
c. Stand-alone working mode
The siren can work independently as an alarm system, with remote controller and detectors
paired to it. In this mode, the remote control and the detectors have to be coded with a
standalone siren to trigger the siren to make alarms.
d. Coding of remote controllers & wireless detectors
In arm or disarm state, keep pressing the alarm set key, until it rings once with indicator light
flashing once, release the set key, then the alarm lights flash quickly, waiting for the wireless
signal from remote controller or detector press SOS key of the remote controller or trigger
detector (which needs coding) to launch a wireless signal it means the coding process is
successful when you hear the siren releases two alert tones confirming it has received the
3
One-key-control function: Remote arm,
remote home arm , remote emergency
alarm, remote control disarm
Tamper function
Built-in AAA NI-MH rechargeable battery
for power loss situations
Transmition power: 10 mW
Emission distance: ≤100m (open space)
Working temperature: -26
Relative humidity: 40%~80% RH
C ~ +60°
°
C
User manual
Publicidad
