Publicidad
Idiomas disponibles
Idiomas disponibles
signal. If you want to learn the next remote controller or detector, only trigger the remote or
the detector again. If the alarm does receive any signal within 10 seconds, it will exit the
pairing mode automatically.
Operation method: keep pressing [set] key of standalone siren, until it sounds once with
indicator light flashing once.
PAIRING SIREN WIRELESS TO A COMPATIBLE ALARM SYSTEM LIKE PNI
SAFEHOUSE HS550, PNI SAFEHOUSE HS650, PNI SAFEHOUSE HS600
At this time the siren is changing working mode to wireless external siren. It will release an
acoustic and optic alarm as long as the host has an alert.
In arm or disarm state, keep pressing the set key of standalone alarm, until it rings 2 sounds
with indicator lights twice, release the set key. Siren lights flash quickly at this time, waiting
for the host's (alarm system) wireless encoded signal let alarm host launch the first wireless
coded signal The siren will send out 2 long and 1 short tones, once it receives the signal,
that means successfull pairing.
Operation method: keep pressing [set] key, until it makes out two sounds with indicator light
flashing twice.
a. Delete all remote controllers & accessories
You can delete all accesories from siren, if it is necessary. You cannot operate standalone
siren alarm after remote controlle is deleted. If you delete accessories, you cannot trigger
the alarm to make alarms.
In arm or disarm state, pressing its [set] key until it rings 3 times, with indicator light flashing
3 times. Release the set key. It means deleting is successful if you hear 2 alert.
Operation Methods: keep pressing [set] key, until it rings 3 times with indicator light flashing
3 times.
b. Standalone alarm state
Arm state: When the siren in this state, all the accessories can trigger it to alarm
Disarm state: When the host in this state, only the parts of the emergency zone could trigger
an alarm, and all other accessories can not trigger an alarm
Alarm state: When the host in this state, the siren starts with alarm on spot. In the case of
no manual operation, the host will exit alarm automatically after 3 minutes, and return to
standby
c. Daily operation
Remote controll is one kind of device which can carry out multi-function operation paired
with this siren. Its function is convenient for user to control its state when he is at the
door (outdoor) or long-distance, such as out arm, home arm, emergency alarm , the instant
disarm functions etc.
Out arm: press [ Arm ] key, it will be in arm alert state at once.
Disarm: press [ Disarm ] key, it will be in disarm standby state at once.
Home arm: press [ Home Arm ] key, it will be in the home arm alert state at once.
Emergency alarm: press [ Emergency ] key, it will be an emergency trigger, send to siren,
and an instant alarm.
User manual
4
Publicidad
