size of the injector is 1.9 mm.
• This heater is constructed in conformity
with relevant texts in the EN14543:2017
standard
• Keep the instructions for future reference
Warnings
• Read the instructions before installation
and use. This appliance must be installed
and the gas cylinder stored in accordance
with the regulations In force.
• Only use the device for its intended pur-
pose. Other usage may lead to burns, fire,
explosion, crash, etc.
• Install the heater only if it complies with
local regulations, laws and standards;
• Check if the information indicated on
the type plate corresponds your situation
before you connect the appliance.
• Install the heater according to the instruc-
tions as described in the installation sec-
tion of the directions for use;
• This heater is manufactured according to
CE safety standards. Nevertheless, as with
any other heating device, care must be
taken;
• RISK OF FIRE Never use the heater in plac-
es where inflammable and/or harmful
Gases, products or fumes may be present
(e.g. exhaust gases, paint fumes, curtains,
paper, clothes);
• If the heater is positioned too close to
inflammable materials you may risk fire;
• For safety reasons take care when children
or animals are in the proximity of the heat-
er, as with any other heating device, and
4
63