Publicidad
Idiomas disponibles
Idiomas disponibles
Vertical Shot of Steam
The vertical steam feature allows your iron to function as a
garment steamer.
Tip: When using the vertical shot of steam on clothing, hang the
clothing on a clothes hanger for best results. Hanging curtains
and drapes may also be steamed.
1. Hold the iron in a vertical position, with the iron close to but not
touching the fabric you want to steam.
2. With your other hand, pull the fabric tight.
3. Press the Shot of Steam button in approximately 3-second
intervals as you move the iron across the wrinkled area.
WARNING: To prevent the risk of burns, keep your hand away from the area being
steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
3-Way Motion Smart Auto-Off Feature
When the iron is plugged in, the power indicator will light steadily, indicating there is
power to the iron. If you leave the iron:
• In a horizontal position without moving it, or accidentally tip the iron over, it will
automatically stop heating after 30 seconds. The red wait light will blink to let you know
that the iron has stopped heating.
• In a vertical position (on its heel rest) without moving it, the iron will automatically turn
off after 15 minutes. The red wait light will blink to let you know that the iron has
stopped heating.
IMPORTANT: The red wait light will continue to blink for 5 minutes, then turn totally off.
To reset the iron:
• Move the iron back and forth. The red wait light will stop blinking and the iron will start
heating again (allow it to reheat for 2 minutes); the iron is now ready to use.
WARNING: Motion smart auto-off is a safety feature, not a recommended means for
turning your iron off. See"Caring for Your Iron After Use" for information on turning off
your iron and storing it safely between uses.
English - 8
Publicidad
