Descargar Imprimir esta página

Danby Silhouette PROFESSIONAL SPRWC031D1SS Manual Del Propietário página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
FUNCTION INSTRUCTION
The default temperature setting is 54°F (12°C). The
default temperature scale is °F.
To switch the display between °F and °C, press
and hold the increase and decrease buttons
simultaneously for approximately 3-5 seconds.
The temperature can be set as low as 41°F (5°C) or
as high as 64°F (18°C).
Actual temperature inside the appliance can vary
based on ambient temperature, how often the
door is opened and how many warm bottles have
recently been added to the appliance.
If the appliance loses power, the control panel
will remember the set temperature. Once power
is restored, the appliance will return to normal
functioning automatically.
If the inner cabinet temperature is higher than
73°F (23°C) for one hour, the error code "HI" will
show on the display, the alarm indicator light will
illuminate and an alarm will sound.
If the inner cabinet temperature is lower than 32°F
(0°C) the error code "LO" will show on the display,
the alarm indicator light will illuminate and an
alarm will sound.
If the inner cabinet temperature remains at 32°F
(0°C) for more than 30 minutes, the error code
"CL" will show on the display, the alarm indicator
light will illuminate and an alarm will sound. The
appliance will stop functioning to prevent the
contents from freezing.
DEMO MODE
Demo mode is only intended to be used on the sales
fl oor. It can be used to show how the appliance will
look while running without engaging the compressor
or the cooling function. The fan will run on low
speed but all alarms and beeping will be disabled.
Press and hold the increase button and the power
button at the same time for 10 seconds to enable
demo mode. The demo mode indicator light will
illuminate.
Press and hold the increase button and the power
button at the same time for 10 seconds to return the
appliance to standard mode.
OPEN DOOR ALARM
If the door is not closed completely for 5 minutes, the
alarm indicator light will illuminate and an alarm will
sound.
The open door alarm can be silenced temporarily by
pressing the power button once. The alarm indicator
light will remain illuminated and the interior light will
continue to fl ash until the door is closed.
If the door is closed and the alarm continues to sound,
check that the actuator at the bottom of the door is
making contact with the switch on the appliance.
DISABLE OPEN DOOR ALARM
The audible door alarm can be permanently turned
off if desired. The alarm indicator light and the
interior light will continue to illuminate if the door is
left open for more than 5 minutes.
To disable the open door alarm, press and hold the
mode button and the light button at the same time for
3 seconds until the disable door alarm indicator light
illuminates. In future if the door is left open the alarm
indicator light and the interior light will still fl ash, but
the audible door alarm will not sound.
ENERGY SAVING MODE
Energy saving mode will turn off the interior light,
the control panel lights and the display. The energy
saving mode indicator light will illuminate.
Pressing the increase or decrease button will cause
the display to turn on for 5 seconds before resuming
energy saving mode.
SABBATH MODE
Sabbath mode can be used to disable all interior
lights and sounds from the appliance.
Press and hold the increase button and the mode
button at the same time for 5 seconds to enable
Sabbath mode. The SAB symbol will illuminate and
the display will show "Sb" to indicate that Sabbath
mode is active.
Press and hold the increase button and the mode
button for 5 seconds to return the appliance to
standard mode.
8

Publicidad

loading